Product Range Overview -

Select your site:

Below is an overview of all Dulux Powder Coat ranges. Use the table below to identify your project type and what powder coat ranges are suitable.

Product Range Table

• Alumi Shield™ warranties are available when applied by a Dulux Accredited Powder Coater or Dulux Prime Accredited Powder Coater to the warranty specification on recommended project types and conditions
All Dulux powder products are NOT suitable in strongly acidic or caustic environments so pH must be between 5 and 9.
1. Fluoroset may be suitable in locations <10m from the high tide line e.g. harbours (contact Dulux for advice).
2. Protexture, Duralloy +Plus, Charisma, Electro, Duratec and Fluoroset are only suitable for environments >10m from the high tide line.
3. Duralloy is only suitable for environments >100m from the high tide line.

Project type definitions:
• Non-habitable projects are those that are not dwelling types. Examples can be furniture, bus shelters, signage etc.
• Residential properties < 4 levels are typically easy to maintain, given their height and access.
• Light commercial projects < 4 levels are sheltered from neighbouring buildings, but require greater durability due to higher usage and wear.
• High-rise residential and commercial projects are less sheltered from neighbouring buildings, raising their exposure and reducing their ease of maintenance.
• Prestigious commercial projects attract attention and require high quality finishes to uphold the longevity and design requirements.
• Monumental projects attract the most attention and have the highest standards required to uphold the reputation and protection expected from landmark sites.

Dulux SpecMap is a smart online tool that helps you identify and specify Dulux Powder Coatings on your projects based on project type, location and corrosivity zone. To use SpecMap click here.

Ultra durable powder coat ranges are delivered with warranty grade advanced ultra durable fluoropolymer thermosetting powder.

The Fluoroset Allure pearlescent range is a collection of beautiful pearlescent and metallic finishes, delivered with warranty grade advanced ultra durable fluoropolymer thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel with an approved powder coating primer system
On all exterior and interior project types
In mild and severe exterior conditions
In general and moderate interior conditions
May be suitable in locations less than 10 meters from the high tide line

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

The Fluoroset Xtreme solid range is a collection of subtle and neutral colours, delivered with warranty grade advanced ultra durable fluoropolymer thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel with an approved powder coating primer system
On all exterior and interior project types
In mild and severe exterior conditions
In general and moderate interior conditions
May be suitable in locations less than 10 meters from the high tide line

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

Super durable powder coat ranges are delivered with warranty grade advanced super durable polyester thermosetting powder.

The Electro anodised look range is a collection of unique anodised look finishes, designed to subtly change in appearance as light conditions alter in the day, delivered with warranty grade advanced super durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential and commercial exterior projects types, and all interior projects types.
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

Charisma™

The Charisma™ flat matt range features contemporary, solid colours in a flat matt finish for a subtle and sophisticated look, delivered with warranty grade advanced super durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential and commercial exterior projects types, and all interior projects types.
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

The Duratec Eternity pearlescent range is a collection of beautiful decorative pearlescent and metallic finishes delivered with warranty grade advanced super durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential and commercial exterior projects types, and all interior projects types.
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

The Duratec Intensity bright range are a collection of fun, bright colours that produce a vibrant impact delivered with warranty grade advanced super durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential and commercial exterior projects types, and all interior projects types.
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

The Duratec Zeus solid colour range is a collection of on trend solid colours, delivered with warranty grade advanced super durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential and commercial exterior projects types, and all interior projects types.
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

Duratec Elements₂

The Duratec Elements₂ textured range is a collection of distinctive, highly mar and scuff resistant textured finishes built to withstand the elements, delivered with warranty grade advanced super durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential and commercial exterior projects types, and all interior projects types.
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Highly durable powder coat ranges delivered with warranty grade highly durable polyester thermosetting powder.

Duralloy +Plus solid

Duralloy +PLUS solid range is a collection of popular solid colours including COLORSTEEL® colours^, delivered with warranty grade* advanced highly durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential projects less than 4 levels, and light commercial less than 4 levels, and all interior
project types.
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

Duralloy +Plus Pearlescent

Duralloy +PLUS pearlescent range is a collection of beautiful, decorative pearlescent and metallic finishes, delivered with warranty grade* advanced highly durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential projects less than 4 levels, and light commercial less than 4 levels, and all interior
project types.
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

The Protexture™ Range is a collection of popular, highly mar and scuff resistant textured finishes built to protect, delivered with warranty grade advanced highly durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable, residential and light commercial projects less than 4 levels, and all interior projects
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

Durable powder coat ranges are delivered with warranty grade advanced durable polyester thermosetting powder.

Duralloy Pearls are a range of decorative pearlesent colours, delivered with warranty grade advanced durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable and residential projects less than 4 levels, and all interior project types.
In mild exterior conditions
On galvanised steel, stainless steel and Zincalume®
In general interior conditions
In environments greater than 100m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

The Duralloy solid colour range is a collection of popular solid colours including Colorsteel® colours^, delivered with warranty grade advanced durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable and residential projects less than 4 levels, and all interior project types.
In mild exterior conditions
In general interior conditions
In environments greater than 100m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

The Duralloy Mannex textured range is a collection of popular textured finishes including Colorsteel® colours^, delivered with warranty grade advanced durable polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On non-habitable and residential projects less than 4 levels, and all interior project types.
In mild exterior conditions
In general interior conditions
In environments greater than 100m from the high tide mark

Only Dulux Accredited and Dulux Prime Accredited Powder Coaters are able to issue our Dulux Alumi Shield™ and Steel Shield™ warranties after demonstrating their capability to meet stringent quality conditions and international standards.

Bright colour delivered with tough polyester thermosetting powder.

Bright solid colours and pearlescent finishes that produce a big impact, delivered with tough polyester thermosetting powder. Recommended usage includes commercial fitouts, furniture, electrical switchboards and aftermarket automotive components.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright semi bright steel, black steel, blue steel, galvanised steel, stainless steel and Zincalume®.
In mild exterior conditions
In general interior conditions
In environments greater than 500m from the high tide mark

Textured effects delivered with tough polyester or modified epoxy thermosetting powder.

The Surreal Effects Aztec range is a collection of heavy undulating profiles, with a pearl vein ripple delivered with tough Polyester thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
On galvanised steel, stainless steel and Zincalume®
On non-habitable exterior project types and all interior project types.
In mild exterior conditions
In general interior conditions
In environments greater than 500m from the high tide mark

The Surreal Effects Hammer range is a collection of heavy undulating gloss profiles, with a coloured vein ripple delivered with tough modified epoxy thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium,
On mild steel, bright/semi bright steel, black steel and blue steel
On galvanised steel, stainless steel and Zincalume®
On non-habitable exterior project types and all interior project types.
In mild exterior conditions
In general interior conditions
In environments greater than 500m from the high tide mark

The Surreal Effects Mannex range is a collection of distinctive and decorative textured effect finishes delivered with tough polyester thermosetting powder.

It is ideal for use:

On Pre-treated architectural grade aluminium,
On mild steel, bright/semi bright steel, black steel and blue steel
On galvanised steel, stainless steel and Zincalume®
On non-habitable exterior project types and all interior project types. In mild exterior conditions
In general interior conditions
In environments greater than 500m from the high tide mark

A range of matt ripple finishes designed for interior only applications delivered with a tough modified epoxy thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright semi bright steel, black steel, blue steel, galvanised steel, stainless steel and Zincalume®.
On all interior project types.
In general interior conditions

The Surreal Effects Scylla range is a collection of open ripple effects delivered with tough modified epoxy thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium,
On mild steel, bright semi bright steel, black steel, blue steel, galvanised steel, stainless steel and Zincalume®.
On non-habitable exterior project types and all interior project types.
In mild exterior conditions
In general interior conditions
In environments greater than 500m from the high tide mark

Anti Graffiti coatings delivered with tough, durable polyurethane powder coating.

Armourspray®

Armourspray is a range of solid, pearlescent and clear finishes with high chemical resistance allowing the removal of most forms of graffiti, delivered with warranty grade* advanced highly durable polyurethane thermosetting powder.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright/semi bright steel, black steel and blue steel
In mild and severe exterior conditions
In general and moderate interior conditions
In environments greater than 10m from the high tide mark
Over other Dulux powder coatings as a protective clear layer

aluminium warranty

aluminium warranty powder coating

aluminium warranty powder coating

warranty steel duralloy plus

Solid colours and effect finishes, designed for interior only applications, delivered with modified epoxy thermosetting powder.

Copol®

Tough, chemically resistant finish for interior applications only, delivered with modified epoxy thermosetting powder. Recommended usage includes shop fittings and industrial racking. Solid colours may also be used for inter-coat exterior applications not exposed to sunlight such as automotive under bodies.

It is ideal for use:

On pre-treated architectural grade aluminium
On mild steel, bright semi bright steel, black steel, blue steel, galvanised steel, stainless steel and Zincalume®.
In general interior conditions

^ Colour variation may occur between powder coated surfaces and other manufacturers’ materials as coatings technologies and master panels/colours can change over time. We always recommend cross-checking your colour choice with a powder coated swatch sample for final approval.

Specify a Product

Specify a Product

Colour Selector

Order Swatches

Find a Powder Coater

Find a Powder Coater

Worth doing, worth Dulux.^®